Repiping is not a repair anybody wakes up wanting. It’s what you land on after the third leak in eighteen months, or after you finally look at the rusty water in the tub and admit it isn’t the fixture.
Here’s the honest version: most houses don’t need it. Patching one bad section is cheaper and we’ll do that all day. But when the pipe itself is failing everywhere at once, patching is just paying us to come back. We’ll tell you which one you’ve got, and we’ll tell you before you’ve spent money finding out the hard way.
We’ve been repiping houses around Spring since 2017. There’s somebody on call 24/7, and we’ve got 320+ five-star reviews from your neighbors.
Signs Your House Needs Repiping, Not Another Patch
- Orange or brown staining in sinks and tubs. That’s the inside of your pipe coming out with the water. It doesn’t get better.
- Pressure that dropped and stayed dropped. Corrosion narrows the pipe from the inside. You lose it slow enough that you stop noticing until a guest mentions the shower.
- Leaks in more than one place. One pinhole is bad luck. Three in a year is a pattern, and the pattern is the pipe.
- Galvanized or polybutylene supply lines. If your house is old enough to have either, it’s a matter of when, not if. More on both below.
- Water that smells or tastes metallic. Same story as the staining, you’re just catching it a different way.
Before we quote a whole house repipe we look at the actual lines, not just the symptom you called about. If it turns out one run under the slab is the whole problem, that’s a water line repair and we’ll say so.
PEX or Copper: What We Repipe With and Why
Both are good. They’re good at different things, and around Spring the choice usually comes down to your house and how long you’re staying.
| Uponor PEX | Copper | |
|---|---|---|
| Cost | Less | More |
| Wall cuts | Fewer. It bends, so it threads through existing paths | More. Rigid, needs joints at every turn |
| Hard water and scale | Resists it | Scales over time |
| Freeze | Flexes, more forgiving in a hard freeze | Splits |
| Fire resistance | Lower | Higher |
| Rated life | 50+ years | 50+ years |
We use NSF-certified Uponor PEX, and our crew is trained on it specifically. For most Spring houses that’s what we’d recommend, mainly because it goes in with far less cutting, which means less drywall to put back and a smaller total bill than the pipe price alone suggests.
Copper is still the right call sometimes, and if you want it, we’ll run it. What we won’t do is tell you one is universally better. Anybody who does is selling.
Galvanized and Polybutylene: If Your House Has It, Read This
Galvanized steel was standard in older homes. It rusts from the inside, and the rust is what you’re seeing in the tub and tasting in the water. By the time it stains, the pipe is already well down the road.
Polybutylene is the gray plastic pipe used widely from the late 1970s into the mid 1990s. It fails at the fittings and it fails without warning, and a lot of insurers have opinions about it. If a home inspector flagged it, or you’re buying a house that has it, get a number on a repipe before you close, not after.
Either one, we’ll pull a section and show you what’s actually inside it. That conversation goes a lot better when you’re looking at the pipe instead of taking our word for it.
How a Whole House Repipe Actually Goes
Most houses are about two days. Here’s what those two days look like, because “we’ll be in your walls for a while” is not an answer.
- We map your lines first. Where everything runs, where the shut-offs are, what can be threaded through existing paths. Fewer surprises on day two.
- We cover your house before we cut anything. Floors get protected, the crew vacuums as they work. You should not be finding drywall dust in March.
- New lines go in, new shut-off valves with them. Those valves are included, not an add-on. Old ones seize and you find out at the worst possible moment.
- We pressure test before we close anything up. Every fixture gets run. You watch the test.
- Access holes get patched. We’ll tell you up front exactly what gets cut and what we put back, so the drywall and paint question is settled before you sign, not after.
You keep water overnight in between. We’re not leaving a family without a working bathroom.
Whole House Repipe vs. Partial Repipe
A partial repipe replaces the bad runs and leaves the sound ones. It’s cheaper, it’s faster, and when the failure is genuinely local it’s the right answer.
It’s the wrong answer when the whole system is the same age and the same material, because then you’re paying for mobilization and wall repair twice. The test we use is simple: if the pipe we pull out looks like the pipe we’re leaving in, do it all once.
While the walls are open is also the cheap time to handle anything else you’ve been putting off. A camera inspection of the sewer line, or a water heater that’s already past ten years, cost a lot less to do now than as a second visit later.
Repiping in Augusta Pines, Benders Landing, Spring Trails and Around Spring
We repipe all over Spring, and the neighborhoods we get called into most are the ones that went up in the same stretch of years: Augusta Pines, Benders Landing, Spring Trails, Wimbledon Falls, Lexington Woods and Legends Run. Same builders, same era, same pipe, so when one house on a street needs it, the neighbors usually aren’t far behind.
We also cover Klein, Champion Forest, Tomball, The Woodlands, Atascocita, Humble, Conroe, Cypress and the rest of north Houston, across 77069, 77070, 77373, 77375, 77377, 77379, 77386, 77388, 77389 and 77429.
A whole house repipe is worth travelling for, so we also cover Cinco Ranch, Brookshire, Bellaire, Briar Forest, Clear Lake and Alvin.
Do not see your town on that list? Here is everywhere we work, plus every plumbing service we offer.
Repiping Questions We Get From Spring Homeowners
How long does a whole house repipe take?
About two days for most Spring homes. Bigger houses, two stories, or a lot of slab work can push it longer, and we’ll tell you that when we quote it rather than on day three.
Do I have to move out during a repipe?
No. Water goes off during working hours and back on before we leave. It’s noisy and there’s dust, but people stay in the house for it all the time.
Will you tear up my walls?
We cut access holes, not walls. PEX bends, so we thread it through paths that already exist and that keeps the cutting to a minimum. You get the list of every spot we plan to open before we start.
Is PEX or copper better for repiping in Texas?
For most homes here, PEX. It handles our hard water better, it’s more forgiving in a hard freeze, and it goes in with less demolition. Copper wins on fire resistance and some people simply prefer it, which is a fine reason.
Does repiping add value when I sell?
It removes an objection, which is the real value. A buyer’s inspector flagging galvanized or polybutylene is a negotiation you lose. Having it already done, with paperwork, takes that off the table.
How much does repiping cost in Spring, TX?
It comes down to the size of the house, how many bathrooms, one story or two, and whether you go PEX or copper. We give you a written number after we’ve looked at your lines, and we’d be suspicious of anybody who gives you one over the phone.
Do you repipe commercial buildings too?
Yes. Occupied buildings need more coordination around shut-offs and tenant notice, so tell us that up front and we’ll build the schedule around it.
Get a Repiping Quote in Spring, TX
Call or send the form and we’ll come look at your lines. If you’ve got an active leak right now, say so. Somebody’s on call 24/7. Ask about financing if the timing is rough.